Magnetic Fidget Toggle Switch 3D Printer Model
The file 'Magnetic Fidget Toggle Switch 3D Printer Model' is (stl) file type, size is 222.9KB.
The file 'Magnetic Fidget Toggle Switch 3D Printer Model' is (stl) file type, size is 222.9KB.
Update Feb 12, 2022: Added chamfered version to match the original switch better.
This is a remix of the original fidget toggle switch by kriswillcode.
This version uses 4 8mm x 3mm or 5/16"x1/8" neodymium magnets to enable the switching action. This upgrade gives a much more satisfying and instant click between switch positions. Since it doesn't use a printed spring plate for the switch action, it also will wear out much slower, if at all.
Note when assembling: Make sure the two magnets on the toggle arm repel the magnets opposite the respective side of the toggle. For example, Left Body: Toggle: Right Body: Use a dab of super glue if the magnets don't stay in on their own by friction, just make sure they're aligned properly first!
| fidgetswitch-case-magnet-chamfered.stl | 378.0KB | |
| fidgetswitch-case-magnet.stl | 289.6KB | |
| fidgetswitch-toggle-magnet.stl | 223.1KB |
