Tried to find already made STL files for Magnetic sliders but never found any that worked with the left over magnets i had. So decided to make my own instead. The size of the 3 holes in the print is Diameter 10.70x2.4mm. The plate i made is because i wanted it to slide abit better and it held the magnets better in place. Used super glue to glue in the magnets first then glued on the plate.
Size of the slider: Width 30.70mm Lenght 45.50mm
Enjoy.
Magnet size: Diameter - 10mm Thickness 2mm
Printed in PETG Infill 60% Wall count 3
| Slider_Hexagon_Version.stl | 340.8KB | |
| Slider_Rounded_Version.stl | 661.7KB | |
| Slider_Weave_Version.stl | 811.3KB |
