Cigar holder for really anything you want it to mount to. Using it for golf carts right now.

I just used an image from google to make a similar holder. Print it with like 15% infill and you'll be fine. I bought a random pack of springs to use but you can use rubber bands, hair ties, whatever you want to make it spring shut. I will post links below for the springs and magnets I bought for other projects that I was able to use here.

I will be uploading a velcro-pas-through version later on so if you want to use something like a quad fpv LiPo strap, that'll work well. I used springs, random quad fpv bolt/nut, and magnets outside of this print.

I used hot glue on the insides of the jaws to give a little grip - but may remix it with some small teeth to bite into the cigar a bit. Use a small dab on back to keep magnets from sliding down bars when hitting rough terrain or bumps.

Comment any questions. My magnets fit snug so no glue was required but couldnt hurt in case your filament expands differently.

Springs:
https://www.amazon.com/gp/product/B000K7M36W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Magnets (I think):
https://www.amazon.com/TRYMAG-Different-Neodymium-Refrigerator-Whiteboard/dp/B09WZTSQ9Y/ref=sr_1_5?crid=3SOXE3SD4CERY&dib=eyJ2IjoiMSJ9.rcijwXESfG9aSrkoWvmMnuNF8ptvDV0RqwkTbmTo99159MZSiKIPuWhFh7iCIIjb8cX_YxlE50OtLoTqwPYizNtNFK6rUAyvsB9Q71C55akkaxArWZ31NCoLf0nzAzLD6mvgZz7uCXQOF8DTJb8jxmHoshhBLdwrSyXvkuvxrOgjn8a3xU7ATktHDw-PoJHApA4TxOZmrnK9FKrUv_qWsVY17mzTOlZ2kFRR7qbV_kY.pF4qxkzclftx9h1vvsIQoOS7gvkUMake9weQ3irFc2k&dib_tag=se&keywords=magnet%2Bpack&qid=1729261095&sprefix=magnet%2Bpack%2Caps%2C108&sr=8-5&th=1

(Shankmcgank name not included from photos)

v1 - removed
v2 - smooth jaws, magnetic only
v3 - teeth grip upper, strap/velcro passthru in lower