Magnetic Chess Set 3D Printer Model
The file 'Magnetic Chess Set 3D Printer Model' is (STL) file type, size is 1.2MB.
The file 'Magnetic Chess Set 3D Printer Model' is (STL) file type, size is 1.2MB.
This is a magnetic chess set I designed. Quick video of it in action here.
I made it so each 2x2 set of squares are fixed together permanently with glue. I used hot glue, but you could easily epoxy it.
Each side of the 2x2 set has 2 pockets for magnets, and each square has a pocket in the middle. Each piece has a pocket built in as well.
You will need to PAUSE the print to insert the magnets in most of these, as they are embedded. Unless you are unusually quick and / or dexterous. I used super glue for the magnets so they don't get picked up by the hot end.
The magnets I used were 6mm in diameter by 2mm in thickness. Make sure to be careful of your magnet polarity. It's easy to get them reversed - see the graphic.
| Bishop_01___12112018.STL | 354.4KB | |
| Black_Square_02___01082023.STL | 143.4KB | |
| King_01___02202019.STL | 429.6KB | |
| Knight_03___01092023.STL | 408.6KB | |
| Pawn_01___02202019.STL | 222.2KB | |
| Queen_01___02202019.STL | 1.4MB | |
| Rook_01___02042023.STL | 259.7KB | |
| White_Square_01___010820232022.STL | 128.4KB |
