Magnetic Channel Marker Reminder 3D Printer Model
The file 'Magnetic Channel Marker Reminder 3D Printer Model' is (STL) file type, size is 4.6MB.
The file 'Magnetic Channel Marker Reminder 3D Printer Model' is (STL) file type, size is 4.6MB.
Made this for my Uncle Charlie, to replace his existing, worn out channel marker minder.
Printed in plain translucent PLA, then the markers were spray painted individually. Magnets are aligned, then glued & inserted into the printed parts, let sit magnetically clamped to a piece of metal overnight. Magnets should be aligned identically, so that the magnets attract when the piece is aligned, and repel when misaligned.
Assemble with: qty 2 M4x15mm screws, 4 qty 6mm dia x 3mm button magnets. Note: you can use only 4 magnets (2 inside the base, and two inside the swingarm, but it won't work as well at an angle).
To be affixed to the console with adhesive strips (not shown).
| 4.5mmDiax2mmThkWasher.STL | 54.0KB | |
| markerBuoyReminder_buoy_cone.STL | 3.5MB | |
| markerBuoyReminder_buoy_flat.STL | 3.6MB | |
| markerBuoyReminder_rev1_base.STL | 1.9MB | |
| markerBuoyReminder_rev1_swingArm.STL | 3.5MB |
