Magnetic Cable Anchors/Holders 3D Printer Model
The file 'Magnetic Cable Anchors/Holders 3D Printer Model' is (stl,f3d) file type, size is 2.8MB.
The file 'Magnetic Cable Anchors/Holders 3D Printer Model' is (stl,f3d) file type, size is 2.8MB.
Moin Servus Moin, I designed some simple magnetic cable anchors/holders for easy cable management. Suited for a clean cable management under a desk. The Base is designed to be screwed into the underside of a desk and the Top connects magnetically to the base. If you have some metal bracing under your desk you can use for cable management you don't need to print the Base.
The Magnets must be glued in otherwise they get pulled out. Before glueing check the polarity of that the magnets in the Base so that they don't repel the magnets in the Top.
Magnets needed:
Screws needed for the Base:
Supports
Supports are only needed for the XXX_Top.stl files.
Modify
The dimensions of the magnet holes can easily be resized and customized with the provided Fusion360 (.f3d) file.
Magnets Amazon
Screws Amazon
| Large_Base.stl | 508.0KB | |
| Large_Top.stl | 1.4MB | |
| Magnetic_Cable_Management_Anchor_v9.f3d | 319.5KB | |
| Small_Base.stl | 449.3KB | |
| Small_Top.stl | 1.2MB | |
| XL_Base.stl | 1.4MB | |
| XL_Top.stl | 1.6MB | |
| XXL_Base.stl | 706.8KB | |
| XXL_Top.stl | 1.8MB |
