Magnetic Cabinet Lock Remix – No Screws Needed, Just Stick. 3D Printer Model Free Download

3D Printer Models

Magnetic Cabinet Lock Remix – No Screws Needed, Just Stick. 3D Printer Model

Author: @Nobel0

License: CC BY-NC

File formats: stl

Download type: zip

Size:419.4KB

The file 'Magnetic Cabinet Lock Remix – No Screws Needed, Just Stick. 3D Printer Model' is (stl) file type, size is 419.4KB.

Description Files (8)

Summary

This is my remix to the Magnetic child lock by bookmake.

This design requires no screws or anything, just stick it with easily removable double sided tape.

I changed the magnetic sizes to square 10 x 10 x 2 mm. Where the magnet of mag.holder is circular 12 x 3 mm (circular magnet weaker than the square one).

UPDATE:

I opened 2nd slot in the base to have different configuration for the mag.holder mounting (Added photo for illustration).
The 2nd mag.holder is for the one who has his own magnet, so there is no pocketing (hole) just glue the magnet.

Good Luck

My_base_with_10x10_magnet.stl	292.8KB
My_base_with_10x10_magnet_+_two_slots.stl	294.9KB
My_hook_without_screws.stl	39.8KB
My_lever_with_10x10_magnet.stl	46.6KB
My_mag2_holder_withOUT_magnet_holes_just_glue.stl	21.0KB
My_mag2_holder_with_10x10_magnet.stl	21.0KB
My_Ring_key_base_with_2_magnets.stl	175.1KB
My_Ring_key_handle.stl	261.8KB

Magnetic Cabinet Lock Remix – No Screws Needed, Just Stick. 3D Printer Model

Summary

Tags

You might also like