This sign uses LED noodles to achieve a neon-like look. The front and back panels have some overhangs, but I had no problem printing them without supports. Parts are painted after printing.
Parts List:
4x nOOds - Flexible LED Filament - 3V 300mm long - Red (Adafruit)
1x 2 x CR2032 Coin Cell Battery Holder - 6V output - On/Off switch (Adafruit)
1x JST PH 2-Pin Cable – Male Header 200mm (Adafruit)
2x D41 - Neodymium Disc Magnet 1/4" dia. x 1/16" thick (K&J Magnetics)
2x CR2032 Coin Cell Battery (Commonly Available)
For more information on project: tatianamowry.com/portfolio/bowling-alley-sign
| bowl_sign_back_v1.stl | 213.4KB | |
| bowl_sign_front_v1.stl | 11.0MB | |
| bowl_sign_star_1_B.stl | 6.1KB | |
| bowl_sign_star_1_F.stl | 5.4KB | |
| bowl_sign_star_2_B.stl | 6.9KB | |
| bowl_sign_star_2_F.stl | 7.5KB | |
| bowl_sign_star_3_B.stl | 6.1KB | |
| bowl_sign_star_3_F.stl | 5.4KB | |
| bowl_sign_star_4_B.stl | 6.2KB | |
| bowl_sign_star_4_F.stl | 5.4KB | |
| bowl_sign_switch_v2.stl | 5.4KB |
