Magnet Holder 20x10x3 (Lack Enclosure) 3D Printer Model
The file 'Magnet Holder 20x10x3 (Lack Enclosure) 3D Printer Model' is (stl) file type, size is 27.1KB.
The file 'Magnet Holder 20x10x3 (Lack Enclosure) 3D Printer Model' is (stl) file type, size is 27.1KB.
I needed magnet to hold the doors closed on my IKEA Lack Enclosure https://www.thingiverse.com/thing:4705780
I've decided to create minimalist design, where one magnet in the middle holds both doors by screws holding small handles (together 4 magnets for the whole enclosure).
Size of the used magnet: 20x10x3 mm
Mount with wood screws 3x16 mm
Optimized for 0.4 mm nozzle and 0.2 mm layer height.
I've covered magnets with a transparent tape, so screws/nuts are not hitting magnets directly.
After few months of usage I've created Magnet Holder v2
| Magnet_Holder.stl | 53.1KB | |
| Magnet_Holder_v2.stl | 63.7KB |
