Magnet Dispenser 3D Printer Model
The file 'Magnet Dispenser 3D Printer Model' is (stl,f3d,step) file type, size is 1.2MB.
The file 'Magnet Dispenser 3D Printer Model' is (stl,f3d,step) file type, size is 1.2MB.
Dispenser for magnets 10x5x2. (round 5x2 too)
assemble video - https://youtube.com/shorts/FJp29pzHzgg?feature=share
You need 1 spring at least 17mm lenght and <6mm outer diamert.
Assemple is pretty simple:
Take "case", insert one magnet to the hole in case. It will hold other magnets.
Take spring and place it on pin.
Assemble piston (just insert "pis_cap" to the "piston" hole.
Place piston to the case carefully, the spring must stretch a bit.
Close case by "case_top".
It's all for functional part.
Print for beauty:
"line" x2
"mag" x2
"mag_d" x4
and press it to the case. You may need to play with scale for it.
Video action - https://youtube.com/shorts/R2kqyY3UWhY
| case.stl | 180.4KB | |
| case_cup.stl | 156.4KB | |
| line.stl | 5.4KB | |
| mag.stl | 10.4KB | |
| Magnet_dispenser.f3d | 1014.5KB | |
| Magnet_dispenser.step | 511.3KB | |
| mag_d.stl | 684.0B | |
| piston.stl | 102.1KB | |
| pis_cap.stl | 71.8KB |
