Magnet Based Button/Buzzer 3D Printer Model
The file 'Magnet Based Button/Buzzer 3D Printer Model' is (stl) file type, size is 295.0KB.
The file 'Magnet Based Button/Buzzer 3D Printer Model' is (stl) file type, size is 295.0KB.
Button based on magnets instead of springs.
V2 uses 10x5mm magnets for the outer three sets of magnets, to improve on stability against Tilting. Also makes the button trigger even if it is very tilted.
To assemble, glue 6x3mm magnets into the six outer holes, put some exposed wires into the bottom of the two central holes and push the magnets in.
Depending on your printer settings you might need to ream out the holes to fit the magnets.
The rounded Top needs to be glued on, as i honestly couldnt be assed to make peg holes or anything like that.
Here is my OnShape project if you want to check it out or modify:
https://cad.onshape.com/documents/5949e330af7b9833da4d01a5/w/88fe537609fdfc2550d4932d/e/bbc32b4f0bba4630ec4a6df8?renderMode=0&uiState=65c924e8c5d754501bf13b89
| Button_Base_v1.stl | 123.5KB | |
| Button_Base_v2.stl | 303.8KB | |
| Button_Top_v1.stl | 341.2KB | |
| Button_Top_v2.stl | 133.3KB | |
| Rundung_v1+2.stl | 201.0KB |
