Magic The Gathering – Innistrad: Crimson Vow – Blood Token Counter (Resin Print) 3D Printer Model
The file 'Magic The Gathering – Innistrad: Crimson Vow – Blood Token Counter (Resin Print) 3D Printer Model' is (stl) file type, size is 6.2MB.
The file 'Magic The Gathering – Innistrad: Crimson Vow – Blood Token Counter (Resin Print) 3D Printer Model' is (stl) file type, size is 6.2MB.
So I recently built a deck centered around Strefan, Maurer Progenitor and blood tokens.
Some people use dice on top of the card token..... but I have zero chill and too much time on my hands, so I made this.
This is made to be printed in resin and it requires 4x 3mm cube magnets for the dials.
The top is split in two so you can print everything except the dials standing directly on the resin printer platform, no need to bother with support removal. The cap part of the top will look a bit sagging and weird in the holes, but that's why they're so deep, so it won't matter.
The top part that the dial goes in has two versions - one with indicators to show "this is the number" and one without if you prefer to paint one on or something! (really I just forgot to add it and had to glue some makeshift ones on after the fact....)
The contents of the vial in the picture is a mix of water and clear corn syrup with red fruit colour added in. I tried some actual fake blood to go for realism, but the vibrant, clear, cranberry juice looking liquid just looks so much better for a prop for a fantasy game, at least in my opinion. But experioment to your heart's content! :-)
| Bottom_V3.stl | 6.4MB | |
| Dial_V3.stl | 466.1KB | |
| SUPPORTED_Dial_V3.stl | 1.4MB | |
| Top_P1_V3.stl | 6.9MB | |
| Top_P2_V3.stl | 919.6KB | |
| Top_P2_V3_5_NoIndicators.stl | 111.2KB | |
| Top_P2_V3_5_WithIndicators.stl | 201.1KB | |
| Vial_nowings_V3.stl | 164.6KB |
