Magic The Gathering Commander Deck Case 3D Printer Model
The file 'Magic The Gathering Commander Deck Case 3D Printer Model' is (stl) file type, size is 227.1KB.
The file 'Magic The Gathering Commander Deck Case 3D Printer Model' is (stl) file type, size is 227.1KB.
This is my own (and simple) design for a deck of Magic cards in Commander format.
This case allows you to store your commander deck with (in my case) Dragon Shield sleves and also a side deck of 15 cards.
You will also find 2 STL files wich I STRONGLY recomend to print before the cases in order to check the tolerances between the main case and the top lid.
The lid should slide on top of the main body snugly and get locked with the small creases in order to be opened as you pull them apart.
I printed them in my ender 3 V2 with CURA with 0.2mm layer height and -0.1mm horizontal expansion compensation. This is because there are no tolerances between the parts and you should know the tolerances your printer manages.
I also recommend 100% infill to make them sturdier. This uses 65 grams of filament for the main body aprox.
Im adding my CURA settings as a picture so you can check everything else.
| Black_deck_main_body.stl | 172.9KB | |
| Blue_deck_main_body.stl | 100.7KB | |
| Green_deck_main_body.stl | 188.9KB | |
| Print_first_to_check_tolerances_1.stl | 7.1KB | |
| Print_first_to_check_tolerances_2.stl | 6.7KB | |
| Red_deck_main_body.stl | 217.5KB | |
| Top_lid.stl | 6.9KB | |
| White_deck_main_body.stl | 214.3KB |
