Magic Switchboard 3D Printer Model
The file 'Magic Switchboard 3D Printer Model' is (hex,ino,stl) file type, size is 116.2KB.
The file 'Magic Switchboard 3D Printer Model' is (hex,ino,stl) file type, size is 116.2KB.
What is a "MAGIC SWITCH BOX" ? This is a fascinating magic trick with a board, a battery, 4 switches and 4 LEDs .... check on youtube! https://youtu.be/eHHGQq2YyRk
There are 4 switches and 4 LEDs, one green, one red, one yellow and one blue. The switches are connected with visible wires one to each LED. When one switch is closed, it lights up the LED that is connected to it with the same color. A basic electrical circuit,.. It can even be shown to the "victim" who, even with good electronics skills will only see a basic circuit. But then the magic happens. When you rearrange the LEDs by swapping them in their sockets, the same color switch still turns the same color LED on even though they are no more connected...
I would advice you to see directly the video then go to the "how I designed this" to get all explanations
Enjoy the magic first on yourself before reading further ;-)
| magic.production.hex | 6.7KB | |
| magic.production1.1.hex | 6.9KB | |
| magicSwitchboard_OTAweb_AEROPICV201.ino | 18.4KB | |
| magic_bottom.stl | 776.2KB | |
| magic_frame.stl | 201.3KB | |
| magic_top.stl | 703.3KB |
