Magic Mirror Frame For 24″ Monitor 3D Printer Model Free Download

Description Files (13)

Summary

Printed frame for MagicMirror Project.

Bill of materials:

Raspberry Pi 2, Model B+ with MagicMirror2 (https://magicmirror.builders/)
HP 24er 23,8" Full HD IPS monitor w/original power supply
Infrared PIR Motion Sensor Module for Raspberry Pi 2, Model B+ (ebay)
12 mm push button switch with 5V LED light (ebay)
Short IEC 320 C14-C13 C7 Split Y Cable 26CM (ebay)
Small speaker (ebay)
HDMI Cable Flat Ribbon Type A Male Up Angle to Down Angle Standard Type A Male 20CM (AliExpress).
2-way mirror sheet 1 mm (should be thicker to prevent irregularities in the mirror)
Misc cables for I/O.
Misc resistors for Pull-up and pull-down circuits for I/O.
White PLA from 3D-Net.
Some ABS for parts for power supply and Raspberry Pi (Because of higher temperatures).
Super glue (I used Wurth Klebfix)
Spray paint: Primer, white glossy and clearcoat.

Bracket_SL_Bottom-R-Corner.stl	161.4KB
Bracket_SL_PowerSupply.stl	637.1KB
Bracket_SL_Top-R-Corner.stl	436.7KB
Bracket_SL_TopBottom-L-Corner.stl	28.4KB
CableSupport_SL_Bracket.stl	91.3KB
Frame_SL_Bottom-C-Part.stl	94.8KB
Frame_SL_Bottom-L-Corner.stl	94.9KB
Frame_SL_Bottom-R-Corner.stl	96.8KB
Frame_SL_LeftSide-C-Part.stl	43.2KB
Frame_SL_RightSide-C-Part.stl	38.1KB
Frame_SL_Top-C-Part.stl	71.3KB
Frame_SL_Top-L-Corner.stl	84.8KB
Frame_SL_Top-R-Corner.stl	98.7KB