I'm currently running a Kickstarter (link above) focused on desert/Persian/Arabian/Egyptian stuff, and one thing that that I have enjoyed doing lately is making "props" to be used in scenarios (such as these). I wanted to make some for Empire of Scorching Sands too, and this is the third one!
This Magic (or mundane?) lamp is heavily decorated an perfect to find deep in a desert cave, full of secrets... and possibly a large, blue djinn!
The base and top are ready for support-less printing. Due to the detail on all sides of the main lamp part, I split it verticaly and rotated to print each side supportless, along with some alignment pegs for glue-ing it up. There's also a complete lamp for those that want to get adventurous with support removal!
The lamp is natively sized relatively small (about 8" from front to back), so if you want a larger life-sized one, I recommend scaling up to about 150-175%.
The lamp is filled in inside, but any adventurous remixer could hollow it out and make room for a glowing LED/tea-light or something similar!
Be sure and be sure to check out the Kickstarter for tons of awesome support-free minis and terrain items!
| Lamp_-_Alignment_Peg.stl | 3.0KB | |
| Lamp_-_Base.stl | 8.2MB | |
| Lamp_-_Main_-_Complete_-_NEEDS_SUPPORT.stl | 25.7MB | |
| Lamp_-_Main_-_Split_-_A.stl | 12.4MB | |
| Lamp_-_Main_-_Split_-_B.stl | 13.5MB | |
| Lamp_-_Top.stl | 7.7MB |
