Magic Block Piercing Trick 3D Printer Model

Author: @
License: CC BY-SA
File formats: stl,scad
Download type: zip
Size:141.0KB

The file 'Magic Block Piercing Trick 3D Printer Model' is (stl,scad) file type, size is 141.0KB.

Summary

Hocus Pocus! You present your audience with six colored blocks, each one with a hole through its face. Your audience inspects the blocks as well as the box you will place them in and the pin you will pierce them with. A volunteer selects two of the six blocks. After placing all six blocks into the box, you pierce the box and all the blocks with a pin. Waving your hand over the box, you say a magic word. Turning the box upside down, the lid falls off and out drops the two chosen blocks! But wait the pin is still running through the box with the remaining blocks still pinned in place!

See the demo video http://youtu.be/pmZhGH7pSUo

Print this magic trick along with Thing 24719,

http://www.thingiverse.com/thing:24719

and put on an impromptu magic show! You'll be sure to amaze your friends and family.

large-block.stl 32.9KB
large-bottom.stl 263.7KB
large-box.stl 716.5KB
large-lid.stl 197.6KB
magic-blocks.scad 5.4KB
pin.stl 73.2KB
small-block.stl 32.7KB
small-bottom.stl 263.8KB
small-box.stl 716.5KB
small-lid.stl 307.8KB