This is a remix of pancakewizard's Magic Band Watch Strap https://www.thingiverse.com/thing:2994393 to allow it to be printed in PLA. This worked really well on our trip to Walt Disney World. This can be printed at .12mm or .2mm resolution. I recommend .12mm for a better fit of the Magic Band puck. You may want to use a brim if your first layers don't stick very well. I was able to use a skirt on my Buildtak sheet.
This works with most bands up to 25mm wide and has been tested on the Apple Watch sport band and the Apple Watch link bracelet. The band helps keep the Magic Band puck pressed into position.
Please note that the Magic Band puck can be removed from the watch strap holder but it will require some force. This is by design to prevent it from falling out.
Edit 2-22-20: I updated the strap of the holder to be a bit thicker (v2). The previous version is thinner and may be more comfortable against the wrist and has worked well for me but can break if any force is used.
| Magic_Band_Watch_Strap_remix.stl | 433.7KB | |
| Magic_Band_Watch_Strap_remix_v2.stl | 506.2KB |
![Tigger [Winnie The Pooh] 3D Printer Model](https://res.3axis.co/53245025-f0db-4c99-8418-ed6fde6cc526/images/4e55e73f-923f-4231-9d54-92c7174d901a_thumb.jpg)
![Forky [Toy Story] 3D Printer Model](https://res.3axis.co/0526d3db-49b1-4ba4-b6d0-234ef7df156b/images/350620a7-c4a5-4896-a0c4-faa3f0d7e578_thumb.jpg)
