This is a modified version of my MagHex Tiles for Gloomhaven. Print these if you would rather use preset versions of the tiles in the shapes of the Gloomhaven board tiles.
Uses less magnets overall, but requires more space, plastic and time to print that the regular MagHex tiles.
All MagHex Linked have been broken up to allow them to print on a standard 220x220 mm print bed (like an Ender 3). Full versions also available for those with large beds.
This thing has not been tested! Proceed at your own peril!
06.03.2019
05.24.2019
| MagHex_Linked_A_V1.stl | 167.0KB | |
| MagHex_Linked_B_V1.stl | 198.6KB | |
| MagHex_Linked_C_V1.stl | 167.2KB | |
| MagHex_Linked_D_V1.stl | 217.4KB | |
| MagHex_Linked_E_V1.stl | 243.1KB | |
| MagHex_Linked_F1_V1.stl | 199.4KB | |
| MagHex_Linked_F2_V1.stl | 166.9KB | |
| MagHex_Linked_F_V1.stl | 308.1KB | |
| MagHex_Linked_G1_V1.stl | 193.8KB | |
| MagHex_Linked_G2_V1.stl | 195.1KB | |
| MagHex_Linked_G_V1.stl | 321.8KB | |
| MagHex_Linked_H1_V1.stl | 273.0KB | |
| MagHex_Linked_H2_V1.stl | 124.2KB | |
| MagHex_Linked_H_V1.stl | 352.8KB | |
| MagHex_Linked_I_V1.stl | 320.1KB | |
| MagHex_Linked_J1_V1.stl | 205.7KB | |
| MagHex_Linked_J2_V1.stl | 206.9KB | |
| MagHex_Linked_J_V1.stl | 365.1KB | |
| MagHex_Linked_K1_V1.stl | 206.9KB | |
| MagHex_Linked_K2_V1.stl | 209.3KB | |
| MagHex_Linked_K_V1.stl | 355.3KB | |
| MagHex_Linked_L_V1.stl | 278.9KB | |
| MagHex_Linked_M_V1.stl | 323.7KB | |
| MagHex_Linked_N1_V1.stl | 329.8KB | |
| MagHex_Linked_N2_V1.stl | 332.1KB | |
| MagHex_Linked_N_V1.stl | 496.8KB |
