Magene L508 Taillight Mount For Ibera Rack 3D Printer Model
The file 'Magene L508 Taillight Mount For Ibera Rack 3D Printer Model' is (skp,stl) file type, size is 1.1MB.
The file 'Magene L508 Taillight Mount For Ibera Rack 3D Printer Model' is (skp,stl) file type, size is 1.1MB.
Inspired by two different projects, I took the Garmin base from Cdeluxe and as Alexs784 said, rotated it 90 degrees for the Magene orientation.
This mount is made specifically for the Ibera bike rack from Amazon: https://www.amazon.com/gp/product/B002T5H8MW
The mount that comes with the Magene radar taillight is only for an angles seatpost. I designed this to clip over the back rail and be zip-tied (through the slot) to the longitudinal stays on the top of the rack. This location clear the tire on my Trek 4500 and give good visibility for the light. I hope it's useful.
Designed in SketchUp, skp file included.
I printed it inverted, with the slotted part level. I used Cura's tree support. Despite printing the connector interface at an angle and with a little support, it was clean enough to work well, if a bit snug.
Notes: I used a Tornado, not Tarantula Pro, but Thingiverse doesn't like that. Also, yeah, the print looks rough - I used up some old, damp filament. But it works.
| Magene_L508_Taillight_Mount_for_Ibera_Rack.skp | 2.4MB | |
| Magene_L508_Taillight_Mount_for_Ibera_Rack.stl | 346.0KB |
