MADTAG_f18 Solder Smoke Absorber Fume Extractor Main File 3D Printer Model
The file 'MADTAG_f18 Solder Smoke Absorber Fume Extractor Main File 3D Printer Model' is (stl) file type, size is 6.7MB.
The file 'MADTAG_f18 Solder Smoke Absorber Fume Extractor Main File 3D Printer Model' is (stl) file type, size is 6.7MB.
My youtube channel:
https://youtu.be/lT69TtCMBHM
https://www.youtube.com/watch?v=3EClWR8QxCQ
i am posting more videos on the week ( assembly guide e etc )
New Update: 03/13/2022
Files replaced: Arms / Screws / 12v holder
So.. I created this last year, but I was depressed and decided to put my project in the drawer.
Today I'm better, so I decided to give this little gift for 2022.
works fine on PLA or PeTG
Its a modular "armored" fan smoke absorber. or you decide what is this. ( fresh vent and etc )
You need:
8 screws 4mm x 45mm do not include the head.
8 nuts,
1x xt60 amass port if you want to connect to a 3s Lipo battery,
1x mini switch on/off (10mm x15mm)
1x jack to connect the 12v plug.
this body configuration is for 80mm x 80mm x 24.5MM fan
the spacer arms print 4x ( don´t forget)
Included internal tray support to use activated carbon filter or other filter of your choice.
If you want you can use it without the filter to push the wind directly into the VTX of the drone racers when doing the tests and repairs. the parts are modular and there are several add-ons that you can download separately if you need to.
This body can be used attached to a backpack.
Attention: You can print for your own use but you cannot sale this.
EXTRA PARTS:
ADD-ONS LIST:
Soldering wire rool arm:
https://www.thingiverse.com/thing:5223598
Armored Legs:
https://www.thingiverse.com/thing:5223588
Sponge arm:
https://www.thingiverse.com/thing:5223602
| 12V_BOX.stl | 2.8MB | |
| 6MM_HAND_ARM.stl | 2.2MB | |
| ARM_print2x.stl | 2.1MB | |
| cover12v_box.stl | 763.6KB | |
| filter_female.stl | 122.7KB | |
| Filter_male.stl | 116.5KB | |
| madtag_back.stl | 6.2MB | |
| madtag_f18_front.stl | 18.9MB | |
| SCREW_print2x.stl | 2.2MB | |
| SPACER_ARMS_PRINT_4X.stl | 773.1KB |
