Madballs Screamin' Meemie 3D Printer Model
The file 'Madballs Screamin' Meemie 3D Printer Model' is (stl) file type, size is 13.1MB.
The file 'Madballs Screamin' Meemie 3D Printer Model' is (stl) file type, size is 13.1MB.
Madballs Screamin' Meemie from the mid 1980's era, 179x179 Hueforge to fit all printer sizes.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Get the free color .3MF file version here: https://makerworld.com/en/models/603589
Grab my newest file releases FREE before they get released on other platforms by clicking here: https://makerworld.com/en/@zigzag
The Model is 179x179mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.7mm and the Actual Depth is 2.7mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Burly Wood Transmission Distance: 2.5
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.8mm) swap to Red
At layer #15 (1.36mm) swap to Burly Wood
At layer #25 (2.16mm) swap to White for the rest.
| madballs-screaminmeemie_Front_179x179_S.stl | 76.9MB |
