Machinist Tool Box 3D Printer Model Free Download

Description Files (9)

Summary

Toolbox I built to hold my minimal machinist tools.
Has pocket on top for a Mitutoyo 6" caliper
top drawer has pocket (divider) for an Altoids tin. Print two tops if you don't want the tin pocket

I had to cut the main body into 3 parts to successfully print this (using bambu slicer w/joining holes/pegs) epoxied the printed parts together. I cut the box right below the drawer separator (so the two bottom parts were open),

With full support in the drawer area the print kept lifting and warping. 3 pieces worked great, maybe your printer is better (I used a Bambu A1) and can do one piece.

Latches are from Amazon.

https://www.amazon.com/dp/B07VPD8X9S?ref=ppx_yo2ov_dt_b_fed_asin_title

Also needed:
4x 1/4-20 x.75 shcs (handle mounts)
4x 1/4-20 nuts
9x m3x6 shcs (hinge stop, latch mounts)
9x m3 nut (hinge stop, latch mounts)
2x m3 x 18 (or 20) drawer latch
2x m3 nuts drawer latch
2x springs for latch (I used pen springs, cut to length) dia 5mm ish x 10-12ish
.125" steel rod for hinge 9" long

I included m3 nut pockets in the base to mount feet but wound up gluing feet on. If you can find some small feet that can use a m3 screw use them, feet od 20mm max to bolt on

tb_bottom.STL	129.4KB
tb_bot_draw.STL	18.9KB
tb_draw.STL	19.7KB
tb_dr_knb.STL	23.9KB
tb_hand.STL	150.1KB
tb_hinge_stp.STL	18.1KB
tb_hnd_mnt.STL	104.5KB
tb_lid.STL	147.3KB
tb_slide_latch.STL	9.3KB

Machinist Tool Box 3D Printer Model

Summary

You might also like