Scaled the original files to fit a 7 inch screen.
I did have to do a little modification post print to fit my screens bezel's but this might not be necessary. the keyboard port hole is resized for a USB port and there is a hole in the back for the raspberry pi ports.
I printed and glued in place a generic rpi "backplate" to get the alignment correct for the Pi 3+ i had laying around
| MacBackplate.stl | 39.5KB | |
| Mac_Plus_back.stl | 79.2KB | |
| Mac_Plus_front.stl | 92.4KB | |
| Screen_mount.stl | 6.9KB |
