Wall mount for a Lenovo Thinkcentre M900 Tiny, modified with sunken screw holes. Should fit any other Tiny PC with the same dimensions.
Everything is the same as the original I remixed from, except for adding 2.4mm sunken inserts around the screw holes, to use wood screws with a head that would normally protrude too much. I also thickened the backplate by roughly 2mm for extra strength and because it would be a bit too thin underneath the sunken areas. You could add them without thickening, but you'd only have 1-2mm of material against the wall.
| m900_tiny_wallmount_modified.stl | 102.3KB |
