This are files to make the M10 wire connector to fit the "M57 firing device."
The connectors inside are made from a female spade connector cut in half. Solder wires to the tail of the split connector, and insert. Holes might need widening. After connectors are in place, use your favorite adhesive (using hot glue here.)
Only TPU recommended
| M57_Firing_Device_Connector.step | 149.6KB | |
| M57_M10_Cable_Connector.stl | 584.0KB | |
| M57_M10_Cable_Connector_Cover.stl | 324.8KB |
