The file 'M47 4.5″ 4″ FPV Frame 3D Printer Model' is (stl,3mf,step,dxf) file type, size is 767.8KB.
M47, with 4.7 inch prop clearance will perfectly fit 4" and 4.5" propellers.
Features :
Frame weight is 55g
15mm standofs
20x20 and 25x25 front and back
9-12 mm motor mounting
20mm camera space (no soft mounting for O3 , might come in a previous version)
Ligthweight PETG Gopro-mount with M3 screw that will fit any gopro-mount.
I highly recommend 2002 for anyone unexperienced but feel free to try any other size.
I run the 2104 RCinpower as I like the M2 propnut a lot.
You will need:
6mm M2 screws will suit everything else, you can use 5 and 4mm at some places to save weight.
M2 16mm for stack screws with plastic and metal M2 nuts
20 mm M3 screw and bolt for the gopro
2 optionnal 20mm M2 standofs
- Carbon specs written in the dfx files name. - Only the 11 first files are requierd to build it fully. - B-Arm and F-Arm are stronger but have a smaller motor hole center, you might need to file a bit or use Front_Arm and Back_Arm.| Antennamount.stl | 35.0KB | |
| elrsantennemount_v7.3mf | 125.9KB | |
| elrsantennemount_v7.step | 60.2KB | |
| elrsantennemount_v7.stl | 156.6KB | |
| Front_Arm_V2.dxf | 7.2KB | |
| Front_ARM_V4_v2.stl | 108.6KB | |
| Front_ARM_V4_v3.step | 168.6KB | |
| gpm47_Petg_no_standoff.stl | 494.1KB | |
| M47_B-ARM_4mmregular.dxf | 6.9KB | |
| M47_Back_Arm.step | 131.3KB | |
| M47_Back_Arm.stl | 80.5KB | |
| M47_Back_Arm_Regular4mm.dxf | 7.8KB | |
| M47_BOT_2mmquasi.dxf | 17.6KB | |
| M47_BOT_v20.step | 414.7KB | |
| M47_BOT_v20.stl | 316.5KB | |
| M47_CAM_2mm.dxf | 4.3KB | |
| M47_MID-V2_v6.step | 66.4KB | |
| M47_MID-V2_v6.stl | 49.1KB | |
| M47_MID_V2_2mmregular.dxf | 5.1KB | |
| M47_SUP_1.step | 45.6KB | |
| M47_SUP_2.step | 44.7KB | |
| M47_SUP_Back2mmregular.dxf | 4.0KB | |
| M47_SUP_Front2mmregular.dxf | 4.1KB | |
| M47_TopV2-1.5mmquasi.dxf | 37.7KB | |
| M47_TOPV2.step | 409.1KB | |
| M47_TOPV2.stl | 277.0KB |
