If you would like to support future free releases, please feel free to leave a tip, or support on patreon (especially if you sell prints of my designs). I really want to keep on giving these things away for free.
Making use of the affiliate links that I provide to purchase parts is also a way of supporting me that doesn't cost you anything. I don't recommend anything that I haven't personally used.
Failing all of that, I heartily appreciate a credit or link back to my facebook page when you post your prints on social media.
This is a an almost 100% 3D printed trailer for your 1:10 scale 4x4, based closely on the M416 trailer (it goes perfectly behind my jeep).
It includes working leaf-spring suspension, which I recommend printing in PETG
Besides the printed parts you will need:
For each wheel you will need:
All of the thin parts are designed in multiples of 0.4 for easy thin-wall printing with a 0.4mm nozzle.
2017/02/18
2017/02/28
| alternate_part_split_frame_front.stl | 240.5KB | |
| alternate_part_split_frame_rear.stl | 160.8KB | |
| alternate_part_tub_front.stl | 644.8KB | |
| alternate_part_tub_rear.stl | 515.5KB | |
| axle.stl | 170.7KB | |
| crossbar.stl | 30.0KB | |
| endcap.stl | 348.5KB | |
| fenders.stl | 32.7KB | |
| hitch_loop.stl | 125.1KB | |
| hitch_pin.stl | 165.4KB | |
| leaf_shackle_back.stl | 58.9KB | |
| leaf_shackle_front.stl | 219.3KB | |
| leaf_thin.stl | 115.7KB | |
| main_frame.stl | 368.1KB | |
| reflector.stl | 116.2KB | |
| suspension_bracket_rear.stl | 132.5KB | |
| triangle.stl | 75.7KB | |
| tub_centre.stl | 1.1MB | |
| Updated-suspension-bracket-front.stl | 42.2KB | |
| Updated-suspension-bracket-rear.stl | 39.3KB | |
| wheel_front.stl | 1.3MB | |
| wheel_rear.stl | 779.5KB | |
| wheel_ring.stl | 106.4KB |
