M1911 Airsoft Adapters 3D Printer Model
The file 'M1911 Airsoft Adapters 3D Printer Model' is (stl) file type, size is 42.1MB.
The file 'M1911 Airsoft Adapters 3D Printer Model' is (stl) file type, size is 42.1MB.
I made an adapter for a supressor with 14mm CCW thread and 12mm CCW internal barrel thread for airsoft replicas of the M1911 type such as the Tokyo Marui / Army Armament / Aps brands.
There is also a thread protector for the 14 CCW / 12 CCW adapter.
I made several 12mm CCW (fake adapters) barrel tips of different models for aesthetic use only.
Everything was tested on an APS M1911 Crixus Gladiator GBB replica.
Other models will be added as inspiration arises.
Realization photos will be added later.
Do not tighten more than necessary or risk breaking the threaded part of the plastic part which will remain stuck in the barrel.
| 14CCW_12CCW_Barrel_Adapter.stl | 3.1MB | |
| 14CCW_Basic_Thread_Protector.stl | 5.6MB | |
| 14_CCW_Thread_Protector_Model_A.stl | 5.7MB | |
| Aesthetic_Fake_Barrel_Adapter_Ball_Spire.stl | 41.3MB | |
| Aesthetic_Fake_Barrel_Adapter_Ball_Straight.stl | 4.4MB | |
| Aesthetic_Fake_Barrel_Adapter_Diamond_Spire.stl | 6.8MB | |
| Aesthetic_Fake_Barrel_Adapter_Polygon_Straight.stl | 1.7MB | |
| Aesthetic_Fake_Barrel_Adapter_Spline_Spire.stl | 30.3MB | |
| Aesthetic_Fake_Barrel_Adapter_Triangle_Straight.stl | 1.6MB |
