M-LOK Low Profile Wall Mount 3D Printer Model
The file 'M-LOK Low Profile Wall Mount 3D Printer Model' is (stl,txt) file type, size is 449.8KB.
The file 'M-LOK Low Profile Wall Mount 3D Printer Model' is (stl,txt) file type, size is 449.8KB.
Don't have a Printer? Get Yours Here!
This is a simple yet Effective means of mounting almost any M-LOK equipped Firearm without removing it's magazine. With this mount, Your Firearm can be conveniently kept ready for use while minimally protruding from the surface it is mounted to.
This model is designed to be a tight tolerance fit right off the printer. Just snap it together and screw it to any sturdy surface of your choice, no glue required. Scale the hooks slightly if they dont fit, or fit loosely.
Print in PLA. All parts should be printed at or near 100% infill, I use 95% to avoid over extrusion issues. Cooling should not be required. The hooks can be printed with thick walls, no infill, and no top/bottom layers for a scalloped hollow effect. This may affect strength over time, however it seems plenty sturdy for now.
The screw plate is drilled and countersunk for mounting with #6 Wood Screws. 1" screws are sufficient for mounting directly to wood, however you will need longer screws to mount to a stud through Drywall.
Note : The hooks should be printed with their flat side down for best strength and print quality, the STL's show them standing upright.
| 2_Hole_Wall_Plate.stl | 115.7KB | |
| 4_Hole_Wall_Plate.stl | 140.1KB | |
| Long_Hook_Insert.stl | 525.9KB | |
| Read_Me.txt | 954.0B | |
| Short_Hook_Insert.stl | 583.5KB |
