M-Lock Airsoft Bayonet 3D Printer Model
The file 'M-Lock Airsoft Bayonet 3D Printer Model' is (stl) file type, size is 353.3KB.
The file 'M-Lock Airsoft Bayonet 3D Printer Model' is (stl) file type, size is 353.3KB.
Airsoft knife made into an M-Lock mountable modern bayonet.
The STL for the blade only can be found on the original creators page: https://www.thingiverse.com/thing:2451034
Connects to your gun via M-Lock nuts, if you don't own M-Lock nuts you can 3D print them: https://www.thingiverse.com/thing:4045595
I don't know what screw I used, but I had to use washers in order for the screw to hold in the frame.
3D printable washers, what worked for me was to put them to 60% sizing and increase the height a tad bit: https://www.thingiverse.com/thing:471879
This bayonet model is @Myrmecoman 's knife/blade and I used a cut up version of @Jones84790 's pressure switch mount as the M-Lock mountings for the blade.
| m-lock_bayonet_handle_and_blade.stl | 670.4KB | |
| m-lock_bayonet_handle_only.stl | 617.3KB |
