M-983 HEMTT, 1/35 Scale 3D Printer Model
The file 'M-983 HEMTT, 1/35 Scale 3D Printer Model' is (stl) file type, size is 15.7MB.
The file 'M-983 HEMTT, 1/35 Scale 3D Printer Model' is (stl) file type, size is 15.7MB.
I started out with the HEMTT and started modifying and adding parts from other designs to it, scaling everything to 1/35 scale. Several files to print, a few with multiple parts.
Just reuploaded the Chassis Rear, Center and Front and the Deck Plate with Boxes files. Had them scaled incorrectly, should be right now. If you downloaded them before February 3, 2023 , you can scale them up 137% to make them the correct size or redownload those files.
Revision 1: The deck plate was too small, adjusted the size
Revision 2: Changed up the deck plate some. Made it more of a grate style deck and shortened it just a bit as it was hitting the rear tires. Put it and the storage boxes as separate files.
| 5th_Wheel_Assembly.stl | 3.8MB | |
| 5th_Wheel_Ramp.stl | 1.1MB | |
| Cab_Back_Wall.stl | 369.1KB | |
| Cab_Body.stl | 306.8KB | |
| Cab_Ceiling.stl | 131.6KB | |
| Cab_Interior.stl | 282.5KB | |
| Cab_Left_Wall.stl | 120.7KB | |
| Cab_Right_Wall.stl | 119.7KB | |
| ChassisCenter.stl | 7.0MB | |
| ChassisFront.stl | 10.2MB | |
| ChassisRear.stl | 15.0MB | |
| Deck_Plate.stl | 24.3MB | |
| Engine_Housing.stl | 590.8KB | |
| Engine_Side_Vent.stl | 413.7KB | |
| Exhaust_and_Gearbox_Joint.stl | 8.7MB | |
| Rear_Engine_Deck.stl | 1.5MB | |
| Spare_Tire.stl | 4.4MB | |
| Spare_Wheel_Well.stl | 41.9KB | |
| Storage_Boxes.stl | 6.6MB | |
| U_Joint_and_Wheel_Joint.stl | 1.4MB | |
| U_joint__wheel_joint.stl | 1.3MB | |
| Wheels.stl | 20.9MB |
