Lyrically Bizarre – Jewels Box 3D Printer Model

License: CC BY-NC-SA
File formats: stl
Download type: zip
Size:20.4MB

The file 'Lyrically Bizarre – Jewels Box 3D Printer Model' is (stl) file type, size is 20.4MB.

Summary

I had this project in mind for quite a while, for all my earrings, rings, knick-knacks, something that would go with our modern chic style home.
There are 4 parts to this object.
First, the main box, which took about 10 hours to print on Ender 3. I don't remember the settings, but I do know I upped the wall thickness, to make sure none of the infill shows through. Infill was at 10%. The bottom should be thick enough, but I would reccomend 4-5 top layers, just to make sure they're sturdier. Of course, you can go higher than that, who am I to judge?
Second, the bottom part of the lid. I had issues with my own print, the lid isn't super tight on, shifts a little. Hopefully I managed to fix that for the uploaded model, I did check and check.
Third, the upper part of the lid. The two lid parts need to be glued together. I used gel super glue, for reference. I printed the bottom in silver filament, and the top in white. I think it's pretty cool!
Fourth, the decor part. You'll need to print 4 of these pieces. The neat part is you can print them in different filaments, so you can go crazy with style ideas! My own print wasn't that good, I think the filament was slightly damp, and I did print at 60 speed. Patience isn't my virtue..
I glued the little gems on top, right where the flower middle would be, in case you wanted to replicate the style.
So that's about it! Try it for yourself, see if you like it!
If you love it, or whoever you make it for loves it, the designer would appreciate a little thank you tip :P She needs more coffee for more 3D models!

JewelsBoxDecor_LyricallyBizarre.stl 39.1MB
JewelsBoxLidBottom_LyricallyBizarre.stl 349.9KB
JewelsBoxLidTop_LyricallyBizarre.stl 693.2KB
JewelsBox_LyricallyBizarre.stl 3.1MB