2024-03-14: I felt that the risers where too long so I renamed the original ones to _LONG and uploaded a _SHORT version, the short version feels perfect for me now and matches the length of the ones I made for the Patton.
Pedal risers for the Lynx and Sherman L stock pedals.
Pedal risers add ergonomic comfort for your toes and also increase grip with grub screws.
The grub screws are M5, you can use M5x8mm or M5x10mm depending on how long you need, I used M5x8mm in the photos which gives me plenty of grip.
Print in PLA or PLA+ as oriented by the STL's, you want these to be solid so print with X Walls and 100% infill to make them solid, the holes for the grub screws have threads in them so it can be advantageous to print with line width not higher than 0.5mm.
Installation:
Install using double sided tape as pictured in the photo.
It's easier to screw the grub screws in before installing the riser on the pedal.
Optional but recommended: Add a single zip-tie in the recessed location to further secure the riser in place.
| Lynx_Pedal_Riser_LONG_Left.stl | 1.0MB | |
| Lynx_Pedal_Riser_LONG_Right.stl | 1.0MB | |
| Lynx_Pedal_Riser_SHORT_Left.stl | 1.3MB | |
| Lynx_Pedal_Riser_SHORT_Right.stl | 1.2MB |
