Lure Turner 3D Printer Model
The file 'Lure Turner 3D Printer Model' is (stl) file type, size is 1.3MB.
The file 'Lure Turner 3D Printer Model' is (stl) file type, size is 1.3MB.
Initially created for my own projects, but saw the need for a quality, printable lure turner and tried my hand at it. Easy to print, minimal supports required. Maxes out bed space on a 220 mm print bed, so keep your brim small if using one. Has a snap together system, but recommend gluing joints once assembled. Links to low rpm motor used as well as the bearing for axle are in description.
I just heat set some gator clips into the 2mm holes that are in the axle. This completes the build and as you can see in the photo allows you to clamp your lure to the turner for clear coat.
The badges are optional. You can assemble turner without them. I may get around to editing it and uploading a blank plate so ya'll can customize it yourself if enough people show interest. Assembled picture is the 1st printed prototype, so be nice haha. Printing my keeper as I uploaded this!
Hope this makes a fellow lure makers life a little easier. Makes epoxy clear coats absolutely flawless.
Motor Used: https://a.co/d/6gU2iAv (I used the 12v 10 rpm option)
Bearing: https://a.co/d/au79K0E
| Turner_Axle_v2.stl | 154.3KB | |
| Turner_Badge_v2.stl | 1.1MB | |
| Turner_Bottom_v2.stl | 1.5MB | |
| Turner_Left_v2.stl | 519.2KB | |
| Turner_Motor_Mount_v2.stl | 434.7KB |
