Lunging Elephant 3D Printer Model
The file 'Lunging Elephant 3D Printer Model' is (stl) file type, size is 19.5MB.
The file 'Lunging Elephant 3D Printer Model' is (stl) file type, size is 19.5MB.
Remixed a single model into a pose I wanted. I flipped the model 180 to save on filament.
It is a little head-heavy, though small amounts of sanding the front left side of the model have fixed it.
Printed on a wanhao clone; the monoprice maker select plus
I printed it with colorfab bronzefill at:
-Print speed: 50 mm/s
-Extruder temp: 205C
-Bed temp: 0C with green painters tape
-With a brim + supports
-Flow at 104%
Picture is "as is" and not cleaned up at all.
| Lunging_Elephant.stl | 39.6MB |
