HEAD & TAIL FILES ARE 7Fish's ORIGINAL HEAD AND TAIL. THIS REMIX IS MEANT TO BE AN INCREMENTAL IMPROVEMENT/ALTERNATIVE TO ALLOW FOR EASIER POSING.
Feb 11 2024: I've printed this hollow body in resin which turned out pretty decently when supplemented with a wire inside shown in the first 3 pics. so this can be printed both in SLA and FDM printers. Also reuploaded 7fish's head/tail because someone reported me for having an incomplete model..
Dec 12 2022: I've decided to remove my head and tail edits after being burned by shameless etsy and ebay sellers selling my models and refuse to desist. sorry guys. you can use the original head and tail models from 7fish seen in the remix section.
Lung Oriental Dragon hollow body version.
More pics here: https://www.instagram.com/saisaillias/guide/dragon-haku/18137103745146767/?igshid=u269jyjflegg
All body segments made hollow with segment 1 and 45 with horizontal bars for hooking elastic or wire on the inside for better posing. I found that the pieces printed as is from 7fish's original model made for a rather floppy dragon.
I had terrible difficulty printing out the original claw joints, and never got them to come out well, so i ended up cheating and made bead joints to allow a wire to be passed through and be glued to the claw hub and nail tip sides.
Nail tips are tilted back slightly to allow for a paused print and filament change to have a different nail color from the rest of the limbs/body
Assembly: I used a hot water bath to heat up the female ends to pop the pieces together with out much difficulty.
Faux fur hot glued on to each segment
8mm glass eyes in the pictures.
| 01.stl | 4.0MB | |
| 02.stl | 4.0MB | |
| 03.stl | 4.0MB | |
| 04.stl | 4.0MB | |
| 05.stl | 4.0MB | |
| 06.stl | 4.0MB | |
| 07.stl | 4.0MB | |
| 08.stl | 4.0MB | |
| 09.stl | 4.0MB | |
| 10.stl | 4.1MB | |
| 11.stl | 4.0MB | |
| 12.stl | 4.0MB | |
| 13.stl | 4.0MB | |
| 14.stl | 4.0MB | |
| 15.stl | 4.4MB | |
| 16.stl | 3.5MB | |
| 17armnubs.stl | 6.6MB | |
| 18repeatable.stl | 4.1MB | |
| 19.stl | 3.7MB | |
| 20legnubs.stl | 6.9MB | |
| 21.stl | 4.0MB | |
| 22.stl | 4.0MB | |
| 23.stl | 4.0MB | |
| 24.stl | 3.9MB | |
| 25.stl | 3.9MB | |
| 26.stl | 4.0MB | |
| 27.stl | 4.0MB | |
| 28.stl | 4.0MB | |
| 29.stl | 4.0MB | |
| 30.stl | 4.0MB | |
| 31.stl | 3.9MB | |
| 32.stl | 3.9MB | |
| 33.stl | 3.9MB | |
| 34.stl | 3.9MB | |
| 35.stl | 3.9MB | |
| 36.stl | 3.9MB | |
| 37.stl | 3.9MB | |
| 38.stl | 3.9MB | |
| 39.stl | 3.9MB | |
| 40.stl | 3.9MB | |
| 41.stl | 3.9MB | |
| 42.stl | 3.9MB | |
| 43.stl | 3.7MB | |
| 44.stl | 3.9MB | |
| 45.stl | 3.9MB | |
| Back_Leg_Lower.STL | 523.9KB | |
| Back_Leg_Middle.STL | 619.2KB | |
| Back_Leg_Upper.STL | 712.2KB | |
| claw_alt_joint_bead.stl | 79.1KB | |
| claw_gold_tip_nail.stl | 408.0KB | |
| claw_Hub.STL | 1.7MB | |
| claw_joint_tall.stl | 168.9KB | |
| claw_middle_segment.stl | 625.7KB | |
| Eyes.STL | 707.9KB | |
| ForeArm_Lower.STL | 806.1KB | |
| ForeArm_Sholder.STL | 483.8KB | |
| ForeArm_Upper.STL | 838.5KB | |
| Head.STL | 4.5MB | |
| Head_Horn.STL | 1.1MB | |
| Head_Jaw_less_support.STL | 1.4MB | |
| Head_To_Neck_Pin.STL | 40.2KB | |
| Head_Tung_less_support.STL | 630.6KB | |
| Tail_Tips_A.STL | 2.7MB | |
| Tail_Tips_B.STL | 1.3MB |
