This is my first 3D design, so any remixes are more than welcome!
One of the main issues are that there are several lunchboxes out there all with varying sizes. So just either make sure that the dimension fits your lunchbox
Please find the video build here https://youtu.be/TkpBsKZtjqA
| hinge_bottom-Body-6mm.stl | 10.6KB | |
| hinge_design2-Body.stl | 17.1KB | |
| hinge_design2_top-Body.stl | 15.7KB | |
| hingle_hole-Body.stl | 15.7KB | |
| screen_holder.stl | 1.4KB | |
| speaker_case-Body.stl | 31.9KB | |
| SW_arcade_base-Body.stl | 181.8KB | |
| SW_arcade_face-Body.stl | 1.0MB | |
| SW_arcade_screen-Body.stl | 440.9KB | |
| SW_arcade_screen.stl | 440.9KB | |
| TMNT-base-FINAL-Body.stl | 55.0KB | |
| TMNT-FACE-Body.stl | 1.0MB | |
| TMNT-screen-Body.stl | 27.6KB | |
| TMNT_front_hole-Body.stl | 22.3KB | |
| TMNT_joystick1.stl | 15.5KB |
