The file 'Lunar Rover 3D Printer Model' is (SLDPRT,fzz,STL,stl,sldprt,3dm,SLDASM) file type, size is 35.5MB.
This project is inspired by the Indian moon mission Chandryaan-2 Which will take place in September 2019.This is a special mission because they are going to land on the spot where no one has every landed before.So to show my support i decided to build the actual rover based on the images of the rover online. I was restricted by my 3d printers size so i had to do some slight modifications.
You can download all the code and step by step instructions are here
Full Tutorial here
https://www.instructables.com/id/IOT-Moon-Rover/
| 1111111222222223.SLDPRT | 1.2MB | |
| 2mm.SLDPRT | 30.2KB | |
| 4mm.SLDPRT | 31.2KB | |
| 5mm.SLDPRT | 33.8KB | |
| body_2.SLDPRT | 309.7KB | |
| Chassis_2.SLDPRT | 1020.9KB | |
| circuit.fzz | 2.2KB | |
| coverplate.SLDPRT | 140.6KB | |
| coverplate.STL | 87.4KB | |
| Links_1.stl | 66.9KB | |
| Links_2.stl | 76.7KB | |
| mainbody.STL | 96.5KB | |
| main_body.sldprt | 90.4KB | |
| Mirror2mm.SLDPRT | 24.1KB | |
| MirrorChassis_2.SLDPRT | 1.2MB | |
| MirrorWheel.SLDPRT | 11.4MB | |
| MotorGear01.SLDPRT | 278.2KB | |
| nuttest.SLDPRT | 99.6KB | |
| Part5.SLDPRT | 3.7MB | |
| rover_assembly.3dm | 624.2KB | |
| ROVER_ASSEMBLY.SLDASM | 4.8MB | |
| Servo.SLDPRT | 1.2MB | |
| servoholder.SLDPRT | 154.8KB | |
| servoholder.STL | 30.9KB | |
| Solarpanelholder.SLDPRT | 254.8KB | |
| Solarpanelholder.STL | 74.8KB | |
| testground.SLDPRT | 38.1KB | |
| Wheel.SLDPRT | 9.5MB | |
| Wheel.stl | 638.4KB |
