Mod to add both a 40mm hotend fan, as well as a BLTouch. This is attached via longer versions of the screws that hold the extruder down to the carriage.
Once a BLTouch is mounted, it will be approximately 3mm higher than the stock TAZ 5 nozzle. This is not high enough to avoid the front left bed holddown. A 2mm thick replacement is included.
Requires:
4x 3mm heatset inserts and appropriate length screws
2x 4x25mm screws (and optional washers) to replace existing screws
1x Flathead 3mm screw for bed holddown.
| BL_Mount_V2.stl | 135.5KB | |
| Taz5_2mm_holddown_.stl | 30.8KB | |
| Taz5_40mm_Fan_BLTouch.stl | 338.4KB |
