The originality of this piece is that the heart turns freely in the body of the cat.
1 x LucycatBody : Layer:0.20mm Raft:no Support:no Infill:15%
1 x LucycatHeart : Layer:0.20mm Raft:no Support:no Infill:15%
1 x m3x25mm SHCS
1 x m3 washer
2 x 623zz bearing
Insert the two 623zz bearing in LucycatBody.
Insert the m3x25mm SHCS under the LucycatBody, insert the m3 washer and fit the screw in the LucycatHeart.
Do not tighten strongly, the LucycatHeart must turn freely.
| LucycatBody.stl | 895.3KB | |
| lucycatHeart.stl | 251.4KB |
