Lucent Moth from Destiny 2.
Edited from in-game file, to make it printer-friendly
Design © Bungie
Filaments used:
Body: Filamentum PLA Extrafill Wizard’s Voodoo
Wings: Filamentum PLA Crystal Clear
Base: Addnorth E-PLA Glitz Sapphire and Filamentum PLA Crystal Clear Iceland Blue
There is a file with the moth and wings merged, for resin printing.
Suggestion:
Paint the face and eyes with acrylics.
Print the wings with transparent filament and blush them with soft pastels or shimmers for a neat look.
And blush some feathers for the antenna
The crystals on the wings are quite fragile at the default size, so I do not recommend printing them any smaller. Be careful when removing supports. Might require some sanding.
I also suggest printing the wings at 100% infill
Pause the Base before the crystal prints, and change filament, or use AMS
| Lucent_Moth_Base.3mf | 66.8KB | |
| Lucent_Moth_Base.stl | 97.6KB | |
| Lucent_Moth_Merged.stl | 10.7MB | |
| Lucent_Moth_Moth.3mf | 3.0MB | |
| Lucent_Moth_Moth.stl | 10.0MB | |
| Lucent_Moth_Wings.3mf | 309.6KB | |
| Lucent_Moth_Wing_Left.stl | 399.0KB | |
| Lucent_Moth_Wing_Right.stl | 409.6KB |
