Few notes:
This isn't as good as the Celsior OEM version. I've only redesigned the bottom portion, so the volume is still a bit restricted.
My car is RHD. I assume you will be able to mirror the whole thing for LHD cars.
To maximize volume, I've removed the 12V lighter socket completely and left space for a USB-C panel mount. I plan on burying a high-output 12V to USB-C adapter in the console somewhere I can find space.
I intend on lining the inside with felt. I bought a 50mm wide roll, which is conveniently close to the dimensions of the box, so it should be really easy. I've uploaded a stencil for cutting the bottom section.
Smoking is bad for you
There are a few clips on the main hinge carrier that get in the way. They were part of the old ashtray mounting mechanism. I couldn’t be bothered trying to CAD them in, so you'll need to cut them off.
I've attached photos of the bits I've bought.
Goes without saying, but plz print this out of something heat resistant :)
| LS430_ash_tray_delete_v2.stl | 228.8KB | |
| LS430_ash_tray_v2_-_Felt_Stencil.stl | 5.4KB |
