LRP Shark 1/18 / Anderson MB4 / FTX Blaze Main Gears 3D Printer Model
The file 'LRP Shark 1/18 / Anderson MB4 / FTX Blaze Main Gears 3D Printer Model' is (STL) file type, size is 608.5KB.
The file 'LRP Shark 1/18 / Anderson MB4 / FTX Blaze Main Gears 3D Printer Model' is (STL) file type, size is 608.5KB.
Hi!
So i have made some new main gears for the LRP Shark 18.
The one with straight cut gears are Mod0.5 (Same as original) and will work with original metal pinion gear.
The other helical gears are wider (7mm) and it will need some small modification to get it to fit.
The helical gears holds up really well and are Mod0.7 gears. (Bigger teeth for easier printing and durability)
The only mod you will have to do on the car is to file off the 2 small ridges on the chassie plate where the original sprocket was. The method i thought was best was just to take a dremel cutting blade and file them down with that. (See pictures)
had some small rubbing but after 10 sec on full throttle the rubbing was gone
| 45T_LRP_Main_gear_Re_engineered.STL | 288.4KB | |
| helical_gear_10T_Mod_0.7.STL | 270.5KB | |
| helical_gear_11T_Mod_0.7.STL | 255.5KB | |
| helical_gear_12T_Mod_0.7.STL | 244.5KB | |
| helical_gear_38T_Mod_0.7_Main_gear.STL | 608.5KB |
