LPA NN-14 (Rey’s Blaster) Replica Prop 3D Printer Model
The file 'LPA NN-14 (Rey’s Blaster) Replica Prop 3D Printer Model' is (stl) file type, size is 6.0MB.
The file 'LPA NN-14 (Rey’s Blaster) Replica Prop 3D Printer Model' is (stl) file type, size is 6.0MB.
Replica of Rey's blaster from Star Wars VII with room inside to house electronics. Does not have a movable safety switch, but it does have a movable trigger. If you print it, let me know how it goes and if any changes need to be made. Enjoy! (If you want to print the wall mount it can be found here: https://www.thingiverse.com/thing:2755576)
Hardware required:
6 x 1-64 (1/8") Socket screws
4 x 8-32 (3/8") Button head torx screws
27 x 4-40 (1/4") Button head torx screws
1 x dowel pin (1/8" wide x 1/2" long)
1 x spring (5/8" in length, 11/64" diameter)
UPDATE
-Updated the grip files to clean up the screw holes.
-Updated Front Plate to fix missing node for barrel attachment.
10-2-2016
-Split the Safety Component into two pieces (the Safety Knob and the Safety Plate) to make it easier to print.
3-24-17
-Updated "Bottom Body" to include missing hole.
| Back_Plate_v2.stl | 72.3KB | |
| Barrel_v2.stl | 665.8KB | |
| Bottom_Body_v3.stl | 1.4MB | |
| Bottom_Cylinder_v2-1.stl | 912.1KB | |
| Front_Plate_Revision_v4.stl | 219.9KB | |
| Handle_Middle_v3-1.stl | 657.4KB | |
| Left_Grip_v4-1.stl | 12.7MB | |
| Left_Handle_Plate_v3-1.stl | 364.7KB | |
| Right_Grip_4-1.stl | 12.7MB | |
| Right_Handle_Plate_v3-1.stl | 365.1KB | |
| Safety_Component_v3-1.stl | 3.1MB | |
| Safety_Knob_NEW_v1.stl | 5.2MB | |
| Safety_Plate_NEW_v1.stl | 435.8KB | |
| Side_Panel_Left_v2-1.stl | 180.7KB | |
| Side_Panel_Right_v2-1.stl | 180.6KB | |
| Top_Body_v2.stl | 331.9KB | |
| Trigger_v3-1.stl | 325.3KB |
