My first project and release. Please tell me when something is not ok.
You need:
1x base plate
1x back plate
11x side parts
and 22 screws (for wood):
2.5 x 16 mm
The 2 lines on the back plate are for the distance to the base plate.
The difference between V1 and V2 are the honeycombs.
| All_parts_picture.stl | 2.6MB | |
| Back_plate_V1.stl | 115.8KB | |
| Back_plate_V2.stl | 197.1KB | |
| Base_plate_V1.stl | 566.0KB | |
| Base_plate_V2.stl | 453.9KB | |
| Side_parts_blank.stl | 164.3KB | |
| Side_parts_letters.stl | 213.9KB |
