The file 'Low Profile Schuko Plug – Male 3D Printer Model' is (stl,skp) file type, size is 290.5KB.
UPDATE: 22 July 2024 Elephants foot compensation, added a screw cover, and made more space for wires.
This is a low profile schuko plug, use at your own risk.
I used the pins and earth from an Opal 16A IP20 plug (EAN: 6438056122706, 6438056122720)
The Pins from any plug with screws would work, but the earthing I am not sure, you could try to use it, as long as is the wrap around kind, check pictures.
and M3x16 screw and a M3 nut or heat insters are required.
USE AT YOUR OWN RISK
Firewire flame retardant ABS or ABSpro Flame Retardant or equivalent is recommended.
base.stl | 141.6KB | |
cable-tie.stl | 32.7KB | |
cap.stl | 70.5KB | |
Low_profile_schuko_plug_-_male.skp | 236.5KB | |
Screw_cover.stl | 52.8KB |