This is a remix of OmNomNomagon's Low Poly Planter.
I added a drainage hole and made a vase mode base.
Recommended 15-30% infill to allow the roof of the base layers to print properly, otherwise it extrudes into thin air or across a very sparse infill. That said, once you print it, nobody will see the inside, so who really cares?
Main example photo scaled from 48mm to 60mm height. *.stl file is shorter than the one pictured.
| LowPoly_PlanterBase_VaseMode_V6.stl |
| LowPoly_Planter_V4.stl |
