Low Poly Falcon Heavy With Detachable Rocket Body And Capsule 3D Printer Model
The file 'Low Poly Falcon Heavy With Detachable Rocket Body And Capsule 3D Printer Model' is (stl) file type, size is 705.0KB.
The file 'Low Poly Falcon Heavy With Detachable Rocket Body And Capsule 3D Printer Model' is (stl) file type, size is 705.0KB.
This is a remix of the wonderful low poly falcon heavy by DoctorWatson where I've edited the .stl files so the exhaust, rocket body and capsule are separate, but have locating cylinders added to enable reassembly. I changed the exhaust slightly to remove overhangs to aid printing. The exhaust is lit using these underwater lights from Amazon
Exhaust and body were scaled to 300% in cura lulzbot edition and the rocket body to 310% to aid attachment and removal. There was some trimming of the holes with a dremel to make it fit nicely.
Exhaust printed with 2 shells, 0% infill, and no base in natural PLA from Polymaker at 195C hotend, 60C bed.
Rocket body and capsule printed with 2 shells, 50% in white rPETg from filamentive at 235C hotend, 60C bed.
UPDATE: User @threedom had some issues with the exhaust printing the inner surface of the additional balls I added to aid printing when he sliced it. I didn't have the same problem slicing in Cura lulzbot edition, but other slicers might act differently. Check your slicer before printing!
UPDATE: After my daughter snapped the joining attachment on the capsule off twice I'd recommend printing it on it's side to avoid it snapping in the between layers.
| Capsule_with_fitting.stl | 25.8KB | |
| Exhaust_with_fitting.stl | 3.6MB | |
| Rocket_body_with_both_fittings.stl | 119.6KB |
