EDIT
I added a few differnt "Shaft" STL files with different diameter knubs on top that goes into the bearing. The default one was a 7.9mm which is what i use and printed with my Crealtiy K1 Max. Different printers can have slightly different tolerances/calibrations so some people where noticing the car holder was leaning back with the car mounted. These 2 files i uploaded should provide a tighter fit for those who need it and take the wobble away. Keep up the feed back and ill make adjustment with anything as needed!
I desgined a Workshop Stand with a parts tray to hold my car and parts while working on it. The 3 seperate parts are frimly pressed together for a tight hold but can still come back apart if needed for any reason. "depending on printer tolerances."
The car is on a bearing and can rotate a full 360 for all the right angles. I used a "608z" Bearing that can be found on amazon. Everything can be printed without supports if rotated correctly. Enjoy!
https://www.amazon.com/Donepart-608ZZ-Skateboard-Bearings-Skateboards/dp/B07X28GL9P/ref=sr_1_1_sspa?crid=3MDCAUD62HBU6&dib=eyJ2IjoiMSJ9.r-8h3FM_d9rPXid0O68CC0sNyO1qi1IA5ZD0hedf3TBzvQxTxO46R9ntT_xPI1auVmlqVoMIaBoADoLyMl6P4cew58sa5eSxNm2xHtGxg4qddxO3RYe9EQ6WrvP0pbG6M4hv2GuM87CV2GrKnvf0EfFS4qpcJ5UQfL3kqJhU7lS3rtDvyui1vITexZwE3fie6aZqhK8KF6ZK7yVac_5qk-667bmrYhMZugjzVRIme7gYKx6Q1iobT_wtQUHR23CsfpYpbICd79PiWJNmo2Arr8nOWpD2tqqeje7F3GYMjA4.1v1zcDEKiaJDKfvA2HBqW3LG-KRxuxAKdFCJ5mqG2zg&dib_tag=se&keywords=608z%2Bbering&qid=1729571613&s=industrial&sprefix=608z%2Bbearing%2Cindustrial%2C103&sr=1-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1
| Mini-Z_4WD_Buggy_Holder.stl | 14.5KB | |
| Mini_Z_Car_Holder.stl | 10.8KB | |
| RC_Car_Holder.stl | 11.6KB | |
| RC_Car_Holder_V2.stl | 15.9KB | |
| RC_Stand_Base.stl | 138.9KB | |
| RC_Stand_Shaft_7.9mm.stl | 19.3KB | |
| RC_Stand_Shaft_8.1mm.stl | 19.3KB | |
| RC_Stand_Shaft_8mm.stl | 19.3KB |
